saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Climate Control Unit|Page 8050 > < Control Module Inputs, Outputs, Bus, Power Supply & Ground, ACC|Page 8047
Page 1
background image

Control Module HVAC: Service and Repair
Climate Control Unit

Removing

WARNING
Read through safety and handling rules before starting any work. See Restraint Systems/Air Bag Systems/Service Precautions/Technician
Safety Information.
 

1

Cars with A/C:
Drain refrigerant from the A/C system, see Refrigerant, A/C/Service and Repair.

2

Remove the dashboard.

3

Cars with A/C:
Part the A/C pipes by the bulkhead lead-through.

4

Fit hose clamp pliers part. No.30 07 739 on the hoses by the heater box.

5

Remove the hoses from the heater box.

6

Blow with compressed air in one pipe to drain remaining coolant from the heater box.

7

Remove the drain hose.

8

Remove the knee guard on the driver's side.

9

Cut the cable ties and remove the rear floor air ducts in front of the heater box.

10

Remove the air duct for the dashboard centre vent.

11

Remove the air ducts for the dashboard side vents.

12

Remove the wiper arms.

Climate Control Unit|Page 8050 > < Control Module Inputs, Outputs, Bus, Power Supply & Ground, ACC|Page 8047