9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
2. Lift out the lamp holder.
3. Remove and change bulb.
4. Fit the bulb holder.
5. Close the cover.
High-Level Brake Light
High-level brake light
To remove
1. Remove the strip above the rear window inside the car.
2. Remove the two rubber plugs.
3. Unscrew the nuts holding the brake light.
4. Separate the connector.
5. Press the cover down.
6. Use a plastic spatula (or a screwdriver covered with tape) on the right of the rear window washer nozzle and carefully pry the brake light.
7. Repeat this operation on the left side.
8. Lift up the lamp and put out the electrical lead.
9. Replace the unit.
To fit