saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Bleeding the Hydraulic System|Page 2865 > < Bleeding the Hydraulic System|Page 2863
Page 2
background image

4. Use a flashlight to illuminate the lower hole at the same time as you look into the upper hole and check the fluid level in the reservoir. The fluid

level should lie between the MAX and MIN markings. If necessary, top up using the method described below.

NOTE:  The fluid level can be checked when the soft top is raised (closed). In this case, the level can be a few millimetres below the MIN mark
even if there is a sufficient amount of fluid present.

5. Fit the plastic clips.

Filling oil

The oil quantity in the system is 0.55 l and between the MAX- and MIN-markings, the volume is 65 ml. Always use oil part No. (16) 30 32 356.

IMPORTANT:  Never user the same oil as in the Saab 900 Cabriolet -M94.

1. Operate the soft top to raised (closed) position.
2. Fold forward the rear backrest.
3. Remove the cover over the hydraulic unit.
4. Remove the hydraulic unit retaining bolts and lift up the hydraulic unit.

Bleeding the Hydraulic System|Page 2865 > < Bleeding the Hydraulic System|Page 2863