9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
6
Control modules are sensitive to electrostatic discharges. Great care must be taken to follow the following procedure to avoid damaging internal
components in the control module:
-
Keep the control module in its packaging for as long as possible.
-
Never touch the pins of a control module with your hands or clothing.
-
Ground yourself by touching a part of the cars body/engine. Unplug the connector from the cars control module.
-
Place the exchanged control module in its return packaging without touching the pins.
-
Ground yourself by touching a part of the cars body/engine. Plug in the connector to the cars control module.
Quick Check
Quick Check
-
Check fuse 6A and change if necessary.
Is the function correct?
NO
-
Continue with Quick Check
YES -
See: No Communication With TCM/Checking That the TCM Control Module Is Active
Rectify the fault.
After performing this procedure See: No Communication With TCM/Final Check
Checking That the TCM Control Module Is Active
Checking That The TCM Control Module Is Active
-
Turn the ignition switch to the ON position.
-
The CHECK GEARBOX lamp should go on and then off again.
Is the function correct?