9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
Control Module: Specifications
Pin Number
Test Between Pins #
Test Condition
Test Reading
1
1 & B+
Ignition ON
Less Than 0.5 Volts
Ignition OFF
12.0 Volts
2
2 & 32
Activate With Diagnostic Tool
12.0 Volts or 0.0 Volts
3
No Connection
4
4 & 32
Gear D, Winter Mode ON
0.0Volt
Gear D, Winter Mode OFF
12.0 Volts
5
No Connection
6
6 & 32
20 degrees C
2.3 Volts
50 degrees C
1.7 Volts
80 degrees C
1.0 Volts
7
7 & 32
SPORT Switch Depressed
0.0 Volts
SPORT Switch Not Active
12.0 Volts
8
No Connection
9
Connected But Not Used
Engine Speed
10
10 & 32
Idle Speed Copensation Drive Signal, Gear
0.0 Volts
Position N
From Gear Position N to D,3.2 or 1
12.0 Volts
From Gear Position N to R
12.0 Volts
11
11 & 1
Activate With Diagnostic Tool Check Gearbox
12.0 Volts
Light ON
Check Gearbox Light OFF
0.0 Volts
Ignition ON Lamp Lit.
12.0 Volts for 3 sec.
12
12 & 1
Activate With Diagnostic Tool, SPORT Indicator
12.0 Volts
Lamp ON
SPORT Indicator Lamp OFF
0.0 Volts
13
13 & 32
Selector Lever in Position P, R, 3 & 2
12.0 Volts
Selector Lever In Position N, D & 1
0.0 Volts
14
14 & 32
Selector Lever in Position D, 3, 2 & 1
12.0 Volts
Selector Lever in Position P, R & N
0.0 Volts
15
15 & 30
Engine ON in 1st. Gear at 20 km/h
1.1 Volts @ 190 Hz.