saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Procedures|Page 1065 > < Procedures|Page 1063
Page 10
background image

1. Fit the microswitch and tighten the bolt.
2. Insert the wiring harness.
3. Close the soft top and raise the fifth bow.
4. Insert the wiring harness behind the cylinders and follow the wiring harness for the electrically heated rear window.
5. Fit new cable ties.
6. Plug in the connector.
7. Connect the diagnostics tool and erase any diagnostic trouble code.
8. Fit the rear side trim.

Microswitch, Soft Top Storage

Microswitch, Soft Top Storage

Removing

1. Loosen the top of the luggage compartment upholstery.

Procedures|Page 1065 > < Procedures|Page 1063