9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
/l4-2.0l_turbo_(b205)/Page-2150001.png)
Tie Rod End: Testing and Inspection
Track rod length
1. Adjust toe-in,
2. Measure A. The measurement must not under any conditions exceed 52 mm (2.0 inch).
3. Perform step 2 on the other side of the car.
4. Maximum allowable difference between B and C is 3 mm.
5. Adjust if necessary. After adjusting the length of the track rod, toe-in must again be checked.
6. Check the position of the steering wheel.
