9-3 Coupe (9400) L4-2.0L Turbo (B204) (1999)
/l4-2.0l_turbo_(b204)/Page-834004.png)
5
Fit the piston, using piston fitting tool 78 62 287.
IMPORTANT: Pistons of different makes must not be used in the same engine. The name of the manufacturer is cast inside the piston.
6
Fit the big-end bearing caps with bearing halves (connecting rod numbers facing in the same direction).
Tightening torque 20 Nm + 70° (15 ft. lbs. + 70°).
7
Fit the subframe and oil sump, see.
8
Place a wedge 83 95 239 between the sub frame and oil sump and remove the lifting beam.
