9-3 Coupe (9400) L4-2.0L Turbo (B204) (1999)
Cabin Temperature Sensor / Switch: Service and Repair
Cabin Temperature Sensor, ACC
Removing
1
Remove the ACC control module, see Electronic Climate Control Module/Service and Repair/Control Module, ACC.
2
Press in the buttons beside the cabin temperature sensor and remove the cover over the sensor using your fingers.
3
Carefully release the locking tongues (top and bottom) that holds the sensor in the dashboard. Use a small screwdriver.
4
Remove the sensor by pressing in and unplug the connector.
Fitting
1
Plug in the connector.
2
Fit the cabin temperature sensor.