9-3 Coupe (9400) L4-2.0L Turbo (B204) (1999)
1
Fill compressor oil, see Air Conditioning Compressor/Compressor Oil/Service and Repair.
2
Fit the rear pan of the low-pressure pipe from above.
3
LHD: Raise the car.
4
Lubricate the new O-rings with synthetic vaseline and fit them by the expansion valve.
5
Fit the PAD-connection and pipes, tighten the bolt.
Tightening torque: 9 Nm (6.6 lbf ft)
6
LHD: Lower the car.
7
Remove the bolt that secures the power steering fluid reservoir.
8
Remove the power steering fluid reservoir pipe from the bracket by the radiation.
9
Cars with turbo:
a
Remove the hose between the charge air cooler and the throttle body.
b
Remove the expansion tank retainer bolt.
10
Cars with manual transmission: Secure the clutch pedal in the depressed position.