9-3 Coupe (9400) L4-2.0L Turbo (B204) (1999)
15
Remove the tank pressure sensor.
To fit
1
Make sure all sealing surfaces are clean.
2
Fit the tank pressure sensor.
3
Spray with Kontakt 61 and plug the connector into the sensor.
4
Place the tank on a column lift, for example.
5
Fit the fuel connections and plug in the cables to the fuel pump and tank pressure sensor.
6
Move the handbrake cable for the left-hand wheel to one side and raise the tank slightly, the left-hand side first.
7
Secure the fuel lines in their retainers on the tank.
8
Raise the tank further up to its normal position and fasten the tank straps.