9-3 Coupe (9400) L4-2.0L Turbo (B204) (1999)
Mass Air Flow Sensor: Service and Repair
Trionic T7, 4-Cyl
To remove
1
Undo the hose clip between the connecting hose and the turbo inlet pipe.
2
Unplug the connector from the mass air flow sensor.
3
Detach the mass air flow sensor cable from the cable clips on the top of the air collection box.
4
Remove the top of the air collection box by undoing the snap fasteners and the 4 screws.
5
Lift off the top of the air collection box.
6
Detach the hose from the mass air flow sensor by undoing the clip.
7
Remove the mass air flow sensor, 2 screws.
To fit