9-3 Coupe (9400) L4-2.0L Turbo (B204) (1999)
IMPORTANT
Great cleanliness must be observed when working on the fuel rail and injectors. Wash valves, fuel rail and intake manifold and clean them with
compressed air.
1
Remove the engine cover.
2
Remove the fuel pump fuse no.32 while the engine is running. Turn off the ignition once the engine has stopped. Refit fuel pump fuse no.32.
3
Undo the fuel connections to the fuel rail with the special tool, part no.83 95 261.
Wipe up excess fuel with a rag.
4
Detach the crankcase ventilation hoses.
5
Remove the dipstick and filler pipe and plug the pipe.
6
Remove the cover on the throttle disc. Detach the accelerator wire from the throttle spindle. Remove the accelerator wire and holder and bend to
one side.
7
Undo the cable channel, 3 screws.
8
Unplug the injector connectors and place the cable channel to one side.