saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Wastegate > < Interior - Cold Draught From Steering Wheel|Page 5470
Page 2
background image

2. Tighten the charge air cooler's retaining bolts.

Position the bumper and tighten the bolts.

3. Secure the front edges of the wing liners to the bumper and plug in the fog light connectors.
4. Refit the outside temperature sensor and washer hose. Fit the air shields. Lower the car to the floor.
5. Plug in the connectors and fit the headlamps and direction indicator lamps.
6. Fit the horn and bolt the front grille back in place.

Wastegate > < Interior - Cold Draught From Steering Wheel|Page 5470