9-3 Coupe (9400) L4-2.0L Turbo (B204) (1999)
3
Remove the pins for the solenoid from the connector (pins 5 and 6 in the 6-pin connector and pin 2 in the 2-pin connector).
Note
Note the location of the 3 pins in the connector.
4
Drill out the rivets using a 3 mm drill bit.
5
Separate the upper and lower parts of the selector lever housing slightly at the front. Undo the screws on the solenoid.
6
Undo the lever on top of the solenoid and remove the solenoid.
To fit
1
Fit the solenoid to the lever.