9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
/l4-2.0l_turbo_(b205)/Page-1743003.png)
3. Fit the dust cap on the brake piston.
4. Press the dust cap's collar into the brake cylinder's outer groove.
5. Press the piston into the brake cylinder by such an amount that the dust cap fastens in the brake piston's groove
6. Fit the brake pads.
Important: The RH and LH outer brake pads are not the same. The pads should be fitted with the metal warning strip facing down.
7. Fit the hydraulic body.
Rear
Rear brake caliper, reconditioning
To dismantle
