9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
Camshaft: Service and Repair
Valve Gear
Valve Gear
(Cylinder head removed, fitted in fixture, part no. 83 93 795)
To remove
Important: The cylindrical surfaces round the valve springs are sealing surfaces for the tappets and must not be scratched or scored. Therefore, fit
protective collars, part no. 83 93 746, round the tappet cylinders.
1. Remove the camshaft bearing caps. It is important to finish removal of the bearing caps with the one where the tappets are under load. Lift out the
camshafts.
2. Remove the tappets and place them in the valve stand, part no. 83 93 787.
3. Fit the protective collars, part no. 83 93 746.