9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
1. Fit new O-rings.
2. Clean the sealing surfaces and oil the O-ring. Apply flange sealant, part no. 93 21 795, and fit the adapter housing.
3. Connect the oil seals and the pipe to the turbocharger (turbo).
Tightening torque: 8 Nm (6 ft. lbs.)
4. Make sure the oil plug is tight, fit the oil filter and the air shields. Lower the car.
Tightening torques:
Oil filter: 10 Nm (7 ft. lbs.)
5. Fill up with motor oil, warm up the engine and check for leaks.