saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Component Locations|Page 9705 > < Component Locations|Page 9703
Page 2
background image

3. Unscrew the nuts holding the brake light.
4. Separate the connector.
5. Press the cover down.
6. Use a plastic spatula (or a screwdriver covered with tape) on the right of the rear window washer nozzle and carefully pry up the brake light.
7. Repeat this operation on the left side.
8. Lift up the lamp and put out the electrical lead.
9. Replace the unit.

To fit 

Component Locations|Page 9705 > < Component Locations|Page 9703