saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Alignment|Specifications|Page 1455 > < Alignment|Specifications|Page 1453
Page 3
background image

3. Perform step 2 on the other side of the car.
4. Maximum allowable difference between B and C is 3 mm.
5. Adjust if necessary. After adjusting the length of the track rod, toe-in must again be checked.
6. Check the position of the steering wheel.

Camber 

Camber is not adjustable. If it is not within the specified limits, defective components must be replaced.

Caster 

Caster is not adjustable. If it is not within the specified limits, defective components must be replaced.

Alignment|Specifications|Page 1455 > < Alignment|Specifications|Page 1453