9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
/l4-2.0l_turbo_(b205)/Page-542005.png)
1. Fill with compressor oil.
2. Fit the rear part of the low-pressure pipe from above.
3. LHD: Raise the car.
4. Lubricate the new O-rings with synthetic vaseline and fit them by the expansion valve.
5. Fit the PAD-connection and pipes, tighten the bolt.
Tightening torque: 9 Nm (7 lbf ft)
6. LHD: Lower the car.
