9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
/l4-2.0l_turbo_(b205)/Page-1227001.png)
Fuel Rail: Service and Repair
Fuel Rail With Injectors (B235R, B205L/R)
WARNING
Removal of the fuel rail involves partial dismantling of the car's fuel system. The following points must therefore be observed in connection
with this work:
-
Work only in a well-ventilated area! If approved equipment for the extraction of fuel vapors is available, be sure to use it.
-
Wear suitable gloves! Prolonged contact with fuel can cause skin irritation or dermatitis.
-
Keep a class BE fire extinguisher close at hand! Beware of sparks caused by short circuits and when connecting and disconnecting leads
in electrical circuits.
-
No smoking anywhere in the vicinity.
Dismantling
IMPORTANT
The utmost cleanliness must be observed when handling the fuel rails and injectors. Wash around the injectors, fuel rail and intake manifold and dry with
compressed air.
1. Remove the upper engine cover.
2. Remove fuse 32 for the fuel pump while the engine is running. Switch off the ignition once the engine has stopped. Refit fuse 32 for the fuel pump.
