9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
/l4-2.0l_turbo_(b205)/Page-67003.png)
1. Plug in the connector.
2. Wipe old silicon paste off the evaporator's mounting surface.
Coat a thin layer of silicon paste, part No.30 07 895, on the fan control's contact surface against the evaporator. This is important to ensure proper
functioning and normal service life.
IMPORTANT: The aluminium spacer supplied with the fan control must not be used.
3. Fit the fan control in place, checking that its two sleeves enter the holes in the evaporator's mounting surface.
Screw the Fan control in place.
4
Refit the protective cover.
5. Put the glove box back in place.
6. Calibrate the ACC-system by simultaneously pressing the buttons "AUTO" and "OFF".
