9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
Incorrect decoding of the slip contacts will cause limp-home to activate.
The table shows the relationship between the selector lever position sensor's internal terminals A, B. C and PA and the pins of connector H10-1 and
those of the transmission control module.
To ensure that the control module receives accurate information, it is important for the sensor to be correctly adjusted. Special tool 87 92 467 should
be used for adjusting the sensor.
Diagnostics
Faults on the gear position inputs will generate diagnostic trouble code P0705 and put the transmission in limp-home mode.