9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
2. Fit the locking lever, bolt and new lock nut.
3. Put the steering wheel in a central position.
4. Use a cable tie to fasten the 83 90 130 Dynamometer to the locking lever.
5. Pull on the dynamometer and take a reading when the locking lever goes into locked position.
Repeat the measurement until a stable value is obtained.
Reading: 40 N
6. Tighten or loosen the bolts as necessary.
7. Repeat from step 5 if necessary.
8. LHD: Fit the knee shield.
9. Fit the lower dashboard panel.
Warning: Make sure the cables are not pinched when fitting the lower cover.