9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
/l4-2.0l_turbo_(b205)/Page-1907002.png)
1. Screw on the track-rod end to the correct position on the adjusting screw thread.
Important: Before tightening the clamp bolt, the track-rod end must be at the correct angle, that is 90 to the MacPherson strut.
2. Fit the track-rod end to the steering swivel member and tighten it.
Tightening torque: 60 Nm (44 ft. lbs.).
3. Tighten the clamp bolt.
Tightening torque: 22 Nm (16 ft. lbs.).
4. Check the toe-in and adjust as necessary.
