9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
Global Positioning System Module: Description and Operation
OnStar Control Module (673)
Location
OnStar control module (673)
Main task
The unit contains a mobile phone and a GPS receiver. It is connected to the radio, microphone, control panel, GPS/mobile phone antenna and data link
connector via the car's wiring harness. The unit is equipped with one 12-pin and two 16-pin connectors as well as an antenna connection.
The unit's main tasks in the system are the following:
-
Voice and data communication via the mobile phone network.
-
Receive data signals from GPS and calculate the car's position, which is transferred over the mobile hone network to the OnStar Call Centre via
data communication.
-
Send bus messages to activate the car horn and hazard warning lights.
-
Receive bus messages if the airbag has been deployed in order to automatically call for assistance.
-
Reproduce phone calls via the audio system speakers.
-
Disconnect the sound of the audio system during a phone call. This is done by a mute signal being sent from the OnStar unit to the audio unit,
which then disconnects the normal sound in the connected speakers and the signal to any external amplifier.
-
Diagnostics communication.
Power supply, ground and bus communication