9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
/l4-2.0l_turbo_(b207r)/Page-3988017.png)
2. Guide the bumper into the holder under the rear light cluster. Fasten the shell along the side panel.
3. When the final part of the bumper is pressed in, the mounting in the front section of the bumper must be lifted over the holder so that the bumper is
positioned correctly between the holder and the wing liner.
4. Carefully fasten the inner bumper clip in near the beginning of the moulding.
