9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
2. Fit the moulding over the window frame using 82 93 474 Removal tool. Start by fitting the moulding around the fixed side window. Make sure that
the locating lug is aligned with the recess in the moulding.
3. Push the moulding from the outside so that it fits against the fixed side window. Make sure the moulding's inner flap lies over the door's plate
flange.
4. When the moulding is fitted around the side window, fit the rear glass channel's screws. Make sure the rubber mouldings fits against the rear glass
channel's upper end.
Now work along the whole of the top side of the door.