9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
2. Plug in the connector and do up the clip holding the cable to the motor.
3. Fit the cushion upholstery on the side of the motor.
4. Fit front seat side panel.
5. Fit the seat.
6. Test run the height adjustment motor.
Motor, Height Adjustment, Electrically Operated Seat (357c), CV
Motor, Height Adjustment, Electrically Operated Seat (357c), CV
To remove
1. Move the seat to the highest position.
NOTE: If this is not possible, the adjustment motor must be removed together with the drive.
2. Disconnect the connector from the adjustment motor.