9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
26. Remove the adjustment tools and fit the bearing caps (B).
Tightening torque 8 Nm (6 ft. lbs.)
27. Continue to tighten the camshaft gears to the final torque (C). Use a wrench to grip the camshaft flats.
Tightening torque 85 Nm + 30 degrees (63 ft. lbs. + 30 degrees)
28. Turn the crankshaft 2 rotations in the direction of engine rotation until the markings on the crankshaft pulley and the timing cover are aligned.
Remove the bearing caps and refit EN-48368 Camshaft setting tool (B207R)or EN-48366 Camshaft setting tool (B207E, B207L) to check that the
camshaft setting is correct. Remove the setting tools and fit the bearing caps.
Tightening torque 8 Nm (6 ft. lbs.)
29. Fit the belt tensioner (B).