9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
Intake Manifold: Service and Repair
Intake Manifold
To remove
1. Remove Throttle body actuator unit (604)
2. Remove Control module, Trionic T8 (589)
3. Remove the solenoid valve's hose (A) from the intake manifold.
4. Remove the atmospheric pressure sensor (539) (B) from the intake manifold. Allow the sensor to hang in the connector.
5. Undo the nut for the cable duct (C).
6. Undo the fuel pressure regulator's hose (D) from the intake manifold.
7. Undo the EVAP canister purge valve's hose (A) from the intake manifold and fold aside.