9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
/l4-2.0l_turbo_(b207r)/Page-3248001.png)
Air Register: Service and Repair
Air Vent, Panel, Center
Air Vent, Panel, Center
To remove
1. Remove the center air vent as follows:
IMPORTANT: To prevent the vents from breaking, never pull the adjusting buttons. Make sure that the correct catches are bent in. The
catches which hold together the vents can also be seen through the grille.
^
Carefully press in 82 93 474 Removal tool between panel and air vent, so that the air vent is tensioned.
^
Carefully prize up one of the air grille's clips by inserting a small screwdriver down into the fourth hole from the right, as far as possible
(approx. 20 mm) (A). Carefully prize down the screwdriver while at the same time maintaining the pressure with the removal tool (B).
