9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
/l4-2.0l_turbo_(b207r)/Page-3008002.png)
IMPORTANT: It is extremely important to use the right jaw position on the crimp tool.
5. Place the cable terminal/sleeve into the pliers, see illustration, and clamp together the pliers to secure the cable terminal.
IMPORTANT: Each jaw position on the tool has two sizes, the large one for insulation strain relief and the small one for the conductor
strands.
6. For fitting the cable terminal:
If the connection is equipped with a seal: Move the seal up with the thick section first, slightly above the cable insulation.
IMPORTANT: Take care and make sure that the seals are not damaged.