9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
6. M03: Fit the intake manifold in accordance with the following method, "Intake manifold with SAI, M03".
M04-: Fit the intake manifold in accordance with Tis2Web.
Intake Manifold With SAI, M03
Intake manifold with SAI, M03
To remove
1. Remove the Throttle body actuator (604), in accordance with Tis2Web 9-3 - Engine - 4-cylinder petrol - Engine management system Trionic T8 -
Repair Instructions.
2. Remove the Control module, Trionic T8 (589), in accordance with Tis2Web 9-3 - Engine - 4-cylinder petrol - Engine management system Trionic T8
- Repair Instructions.
3. Remove the battery cover.
4. Disconnect the battery's negative cable.
5. Raise the car.
6. Remove the screw (A) for the SAI pipe's bracket.
7. Remove the lower screws (B) for the SAI pump's bracket. The starter motor is dismantled in the illustration in order to show the position of the
screws.
8. Loosen the screw (C) for the intake manifold stay several turns.
9. Lower the car.
10. Remove the solenoid valve's hose (A) from the intake manifold.