9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
Air Bag Control Module: Service and Repair
Airbag Control Module (331)
Airbag Control Module (331)
WARNING: Read through Safety and handling instructions and Before removing a control module before starting work.
Carry out measures before dismantling the control module.
To remove
WARNING: The battery's ground cable must be removed before the positive cable. Wait for at least 1 minute after disconnecting the
battery before beginning any work on the airbag system. Otherwise the airbag may be deployed unintentionally and this can cause
fatal/severe personal injuries.
1. Ignition key in the position LOCK.
2. Removing the passenger seat.
3. Release the handbrake.
4. Remove the centre console's front side panel.