9-3 FWD (9440) L4-2.0L Turbo (B207R) (2009)
Seals and Gaskets: Service and Repair
Drive Shaft Seal, Right-Hand
Drive shaft seal, right-hand
Changing in car
To remove
1. Remove the intermediate shaft. See Intermediate shaft or Intermediate shaft, Z19 or Intermediate shaft, B284.
2. Remove the seal using a large screwdriver.
Note: Take care not to scratch the hole in the gearbox for the drive shaft seal.
To fit
1. Knock in place the new seal using
Man: 87 92 657 Fitting drift, drive shaft seals.
Aut 6-speed: 32 025 025 Fitting drift, drive shaft seal