saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 4455 > < Initial Inspection and Diagnostic Overview|Page 4453
Page 34
background image

YES -

See: No Communication With the Airbag (SRS)/Check That the Airbag Control Module Is Awake 

Rectify the fault.

After performing this procedure See: No Communication With the Airbag (SRS)/Final Check 

Check That the Airbag Control Module Is Awake

Check That The Airbag Control Module Is Awake

-

Turn the ignition switch to the ON position.

-

The airbag lamp should come on for 3 seconds and then go out.

Is the function correct?

NO

-

See: No Communication With the Airbag (SRS)/Checking the ABS Power Supply and Grounding 

YES -

See: No Communication With the Airbag (SRS)/Checking the Diagnostic Tool 

Checking the ABS Power Supply and Grounding

Checking the ABS Power Supply and Grounding

-

Turn the ignition switch to the OFF position.

Unplug the connector.

-

Control module, Airbag (331)

Initial Inspection and Diagnostic Overview|Page 4455 > < Initial Inspection and Diagnostic Overview|Page 4453