9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
-
Repair or replace the lead concerned.
After performing this procedure See: No Communication With the Trionic T5/Final Check
Check the Immobilizer Switch on the Main Instrument Unit
Check The Immobilizer Switch On The Main Instrument Unit
-
Connect a jumper between pins 22 and 16 on the female connector.
Can Trionic be contacted with the diagnostic tool?
NO
-
See: No Communication With the Trionic T5/Internal Control Module Fault
YES -
See: No Communication With the Trionic T5/Internal Control Module Fault
Internal Control Module Fault
Internal Control Module Fault
-
See: No Communication With the Trionic T5/Before Changing A Control Module
After performing this procedure See: No Communication With the Trionic T5/Final Check
Final Check
Final Check
-
Clear the diagnostic trouble codes in all systems.
-
Carry out a functionality test.
Is the function correct?
NO
-
See: No Communication With the Trionic T5/Before Changing A Control Module
YES -
The steps taken to rectify the fault were correct.
Before Changing A Control Module