9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
4. Raise the car.
5. Pull down the cable and remove the oxygen sensor.
IMPORTANT The leads must not be twisted. The oxygen sensor is highly sensitive to knocks and blows and must be handled with care.
To fit
1. Coat the oxygen sensor threads with Molycote 1000 (30 20 971) to prevent binding.
IMPORTANT The oxygen sensor is sensitive to knocks and jolts and must be handled with care. It is important to ensure that the connection
between oxygen sensor and union is gas-tight.
2. Fit the oxygen sensor.
Tightening torque: 55 Nm (41 lbf ft)