9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
4
Undo and slide up the upper hose clamp on the elbow hose. (The illustrations shows elbow hose 53 30 477 with the old part number and punch
mark).
5
Note the orientation of the elbow hose. Remove the elbow hose.
6
Transfer the lower hose clamp to the new elbow hose. Position the hose clip 2-3 mm from the end of the hose.
7
Fit the new elbow hose to the evacuation line. Make sure that the elbow hose is oriented as the old hose.
8
Slide the upper hose clamp down onto the elbow hose. Position the hose clamp 2-3 mm from the end of the hose.
9
Pull the evacuation line down between the turbo intake manifold and the hose to the A/C system's expansion tank.
10
Fit the elbow hose to the T-piece.
Stamping the campaign plate
After the car has been inspected and/or modified, mark the campaign plate in box A1, using a numeral "8" (Saab Special Tool P/N 02 97 713). If needed,
order this special tool directly from Kent-Moore at 1-800-345-2233.
Warranty/Time Information
See separate information.