9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
/l4-2.0l_turbo_(b205)/Page-2342001.png)
Repairs and Inspections Required After a Collision: Service and Repair
Air Bag System
Check Safety-related Components When Repairing Cars Damaged In A Collision
Cars with triggered seat-belt tensioner and or side airbag
The following components must be replaced when repairing a car in which the seat-belt tensioners and/or the side airbags have been triggered.
The control module can be used a maximum of three times for activating the side airbags.
Check and if necessary repair or replace the wiring harness for the side impact sensor, side airbag and seat-belt tensioner.
Cars with a triggered seat-belt tensioner
When repairing a car with a triggered seat-belt tensioner, the following components must always be changed:
-
All seat belts and belt tensioners in the front seats (1).
-
All seat belts in the rear seat that were used during the collision (2).
Cars with a triggered side airbag
When repairing a car with a triggered side airbag, the following components must always be changed:
- Side impact sensor, side airbag and backrest upholstery (3).
WARNING
The backrest upholstery cover must always be replaced after a side airbag has been triggered. A damaged or repaired cover is liable to affect
the performance of the side airbag.
Cars with a triggered airbag
