9-3 Hatchback (9400) L4-2.0L Turbo (B205) (2000)
Shift Indicator: Service and Repair
Light Box Assembly
To remove
1. Remove them center console.
2. Remove them selector lever casing, refer to Transmission and Drivetrain, Automatic Transmission/Transaxle.
3. Cut the cable ties.
4. Undo the 6-pin connector, remove it from the bracket and remove the wires from pins 4, 5 and 6.
5. Remove the wire from pin 2 of the 2-pin connector.
6. Undo the catch on the front edge and hook out the light box from the rear edge. Keep the spring in a safe place.
To fit
1. Fit a new cable tie in the selector lever housing. Tighten the cable tie holding the sector indicator display wiring. Fit the spring. Hook in the rear
edge of the light box and then the front edge.