9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
Trunk / Liftgate Lock Cylinder: Service and Repair
Tailgate Lock Cylinder
To remove
1. Open the tailgate.
2. Remove the trim.
3. Remove the pull bar from the lock cylinder, fastened with clips, and leave it suspended.
4. Remove the microswitch by bending apart the small hooks and lift it off its groove. Alternatively, it may be sufficient to remove the microswitch
connector.
5. Remove the retainer nuts (2 pcs) that secure the lock cylinder.
6. Remove the lock cylinder by pulling it inwards.
NOTE: Retain the rubber seal that rests against the glass.
To fit