9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
/l4-2.0l_turbo_(b205)_ho/Page-2804012.png)
19. Fit new double-backed tape on the second bow. Stretch the top cover fabric towards the second bow and fold the fabric edge around the bow. Fit
the plastic retainer for the headlining in the second bow. Make sure that the headlining and top cover midlines are directly lined up.
Fit rivets on both sides of the plastic holder to secure it to the second bow.
20. Fit new double-sided tape to the rear screen. Stretch the outer roof and fold it over the first bow.
Screw down the seal for the rear rail.
21. Fasten the headlining in the rear rail.
Fit the metal clip to the lower part of the plastic reinforcement on the rear rail.
NOTE: The metal clip for securing the inner roof to the rear rail was introduced from VIN X7050069/X7000050.
22. Pop-rivet the springs to the centre rail.
23. Fit the headlining elastic bands in the first bow.