9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
Convertible Top Control Module: Testing and Inspection
Test Readings, Control Module Connections
Scope
On the following pages, there are values and directions for measuring signals and levels of the control module.
Keep in mind
-
Note the test conditions, and use common sense when assessing the test results.
-
The specified readings are with the ignition in position ON unless otherwise stated.
-
First, check that the control module is supplied with current and is grounded.
-
Then check all sensor inputs and signals from other systems.
-
Finally, check the control module outputs. Remember that the test readings do not indicate whether the actuator is working.
-
If any reading is not correct, consult the wiring diagram to trace the leads, connectors or components that should be checked more thoroughly.