9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
/l4-2.0l_turbo_(b205)_ho/Page-2890004.png)
Microswitch pin 3 is connected to control module pin 4 and microswitch pin 2 is connected to grounding point G36. When the ignition is turned ON, the
control module outputs B+ via a 1 kOhm resistor to the microswitch from pin 4 and when the fifth bow reaches its intermediate position, the microswitch
closes and the control module inputs are grounded.
Microswitch, Fifth Bow Latch
Microswitch, Fifth Bow Latch
There are microswitches at both latches for the fifth bow that sense if the fifth bow is in lock position and ready for locking.
Pin 3 on the left microswitch is connected to control module pin 17 and microswitch pin 2 is connected to grounding point G36.
Pin 3 on the right microswitch is connected to control module pin 32 and microswitch pin 2 is connected to grounding point G36.
