9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
Convertible Top Position Sensor / Switch: Service and Repair
Lock Fitting/Switch Windscreen Crossmember
Lock Fitting/Switch Windscreen Crossmember
Removing
The following describes removal of the microswitch on the left side. The right microswitch is removed using the same method.
1. Lower the soft top.
2. Remove the sun visor and the visor support.
3. Loosen the windscreen frame seal so that the bolts securing the top part of the windscreen moulding can be accessed.
4. Remove the bolts.
5. Slightly pull down the windscreen frame moulding and
6. Remove the bolts that secure the lock fitting.