9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
Convertible Top Position Sensor / Switch: Service and Repair
Microswitch, Fifth Bow Intermediate Position
Microswitch, Fifth Bow Intermediate Position
Removing
1. Lower the soft top.
2. Remove the rear side trim.
3. Run the soft top to raised (closed) position with the soft top cover and fifth bow raised.
4. Cut the cable ties and unplug the connector. Use a knife to reach the inner cable tie. Pull the wiring harness through the hole in the body.
5. Run the soft top manually to the half open position and fit the soft top support (16) 82 93 144.
6. Pull up the wiring harness and cut the upper cable tie.
7. Remove the microswitch retaining bolt and remove the microswitch.
Fitting