9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
6. Place the screws in the back of the seat cushion, 2 screws.
7. Tighten the screws in the front of the seat cushion.
8. 5D: Fit the plastic covers on each side of the backrest joint.
9. Plug in the connector and attach a new cable tie.
10. Fasten the straps on the bottom of the backrest upholstery under the seat cushion.
11. Fit the seat belt mounting where applicable.
Tightening torque 33 Nm